Trhacie nity - HLINÍK / OCEĽ
HLINÍK / OCEĽ Telo : Hliník AlMg 3,5 %, Tŕň : Oceľ ÚPRAVA Telo : Lesklé, Tŕň : Pozinkovaný
| D mm |
L [+1/–0,2] mm |
M mm |
d1 mm |
K mm |
Vŕtanie mm |
P (min.) mm |
dm mm |
Strih N |
Ťah N |
| 2.4 +0.08 –0.10 |
4.0 6.0 8.0 10.0 12.0 |
0.5 – 2.0 2.0 – 4.0 4.0 – 6.0 6.0 – 8.0 8.0 – 10.0 |
5.0 +0.0 –0.7 |
0.65 ±0.2 |
2.5 | 27 |
1.40 | 180 | 280 |
| 3.0 +0.08 –0.10 |
6.0 8.0 10.0 12.0 14.0 16.0 18.0 20.0 |
1.0 – 3.5 3.5 – 5.5 5.5 – 7.0 7.0 – 9.0 9.0 – 11.0 11.0–13.0 13.0–15.0 15.0–17.0 |
6.5 +0.0 –0.7 |
0.80 ±0.3 |
3.1 |
27 | 1.78 | 300 |
400 |
| 3.2 +0.08 –0.10 |
6.0 8.0 10.0 12.0 14.0 16.0 18.0 20.0 25.0 |
1.0 – 3.5 3.5 – 5.5 5.5 – 7.0 7.0 – 9.0 9.0 – 11.0 11.0–13.0 13.0–15.0 15.0–17.0 17.0–22.0 |
6.5 +0.0 –0.7 |
0.80 ±0.3 |
3.3 |
27 |
1.78 |
400 |
500 |
| 4.0 +0.08 –0.15 |
6.0 8.0 10.0 12.0 14.0 16.0 18.0 20.0 25.0 30.0 35.0 |
1.0 – 3.0 3.0 – 5.0 5.0 – 6.5 6.5 – 8.5 8.5 – 10.5 10.5–12.5 12.5–14.5 14.5–16.5 16.5–21.5 21.5–26.0 26.0–30.0 |
8.0 +0.0 –1.0 |
1.0 ±0.3 |
4.1 | 27 | 2.18 |
800 |
1 000 |
| 4.8 +0.08 –0.15 |
6.0 8.0 10.0 12.0 14.0 16.0 18.0 20.0 25.0 30.0 35.0 40.0 |
1.5 – 2.5 2.5 – 4.0 4.0 – 6.0 6.0 – 8.0 8.0 – 10.0 10.0–12.0 12.0–14.0 14.0–16.0 16.0–21.0 21.0–25.0 25.0–30.0 30.0–35.0 |
9.5 +0.0 –1.0 |
1.1 ±0.4 |
4.9 |
27 | 2.70 | 1 000 |
1 200 |
| 5.0 +0.08 –0.15 |
6.0 8.0 10.0 12.0 14.0 16.0 18.0 20.0 25.0 30.0 35.0 40.0 |
1.5 – 2.5 2.5 – 4.5 4.5 – 6.0 6.0 – 8.0 8.0 – 10.0 10.0–12.0 12.0–14.0 14.0–16.0 16.0–20.0 20.0–25.0 25.0–30.0 30.0–35.0 |
9.5 +0.0 –1.0 |
1.1 ±0.4 |
5.1 | 27 |
2.70 | 1 100 | 1 250 |
| 6.0 +0.08 –0.15 |
8.0 10.0 12.0 14.0 16.0 18.0 20.0 25.0 30.0 |
2.0 – 3.0 3.0 – 5.0 5.0 – 7.0 7.0 – 9.0 9.0 – 11.0 11.0–13.0 13.0–15.0 15.0–20.0 20.0–25.0 |
12 +0.0 –1.5 |
1.5 ±0.4 |
6.1 |
31 | 3.70 |
1 400 |
2 000 |
| 6.4 +0.08 –0.15 |
10.0 12.0 14.0 16.0 18.0 20.0 25.0 30.0 35.0 40.0 |
3.0 – 4.0 4.0 – 6.0 6.0 – 8.0 8.0 – 10.0 10.0–12.0 12.0–14.0 14.0–18.0 18.0–23.0 23.0–28.0 28.0–33.0 |
13 +0.0 –1.5 |
1.8 ±0.4 |
6.5 | 31 |
3.70 |
1 500 |
2 100 |
